The vehicle is in generally good condition regarding its age (2020). The findings from the engine checks are: 1) Cooling system freezing point is at-40 °C (Very good). 2) The brake fluid moisture detected is 1% which is within an acceptable limit. 3) Car main battery measurements are Max: 14.7V – Min: 14.3V indicating healthy performance. 4) No signs of leakage at the engine and engine bay (such as engine oil, brake oil leaks, or coolant leakages). 5) Some of the plastic screws on the engine plastic side covers are missing. 6) A/C lowest temperature has been measured at 6°C. 7) Engine oil manual analysis test detected a small amount of soot sediments (dust, wear particles, carbon, etc.), and small amount of water, and fuel concentration in the oil. The results indicate that the oil doesn’t need immediate replacement and it’s in a good condition.8) Engine needs a good cleaning. Tires measurements have shown that the front and rear tires are in good condition (tires size front: 285/40ZR22 (110Y) Bridgestone Tires & rear: 325/35ZR22 (114Y) BRIDGESTONE Tires). Front and rear brake disc and pads are in good condition. At the interior check we have detected: 1) Right side arm rest need to be placed back properly (owner will arrange this), 2) Rear A/C left vent adjustment button is missing, 3) Interior need a good cleaning. At the paint measurements and check we didn’t detect any signs of repair or repaint at the car metal parts. The car has all-around some scratches that some of them can be removed with a proper paint treatment and protection. At the automatic transmission check no faults have been detected. All the suspension system and the steering axle are still in good condition. Small cracks detected at the front right stabilizer link rubber but no replacement is needed. At the diagnosis test no active or critical faults have been detected. All faults detected are previous faults related to voltage instability (previous battery low voltage). Overall this diagnostic result is consistent with a vehicle in good mechanical condition. For preventive reasons, we recommend to clear all fault codes and perform a re-scan after driving.